V2ray Mikrotik [FREE]

The question isn't if you should integrate them, but how . Running V2Ray on a separate PC or a Raspberry Pi adds latency and a single point of failure. Installing V2Ray directly on your MikroTik device (where possible) or routing traffic through an external V2Ray server via MikroTik's routing engine gives you enterprise-level control.

/ip firewall mangle add chain=prerouting protocol=tcp dst-port=80,443 action=mark-routing new-routing-mark=via-socks /ip route add gateway=192.168.88.254 routing-mark=via-socks The native MikroTik Socks client is not as performant as a modern proxy. It lacks UDP support and can struggle with high concurrency. Use this only for low-bandwidth browsing. Part 4: Method 3 – The Professional Setup: Transparent Proxy Gateway (TPROXY + V2Ray) This is the gold standard for corporate or prosumer networks. You run V2Ray on a separate device (e.g., an old PC or NanoPi R4S) in TPROXY mode. MikroTik does Policy Based Routing (PBR) to this gateway. Why TPROXY? Unlike Socks or HTTP proxy, TPROXY preserves the original destination IP. This means CDNs, banking apps, and gaming traffic work flawlessly. Step 1: Configure V2Ray on the Gateway (Linux) On your gateway (IP: 192.168.88.10), run V2Ray with this inbound: v2ray mikrotik

/interface ethernet set ether1 tcp-segmentation-offload=no DNS leaks (Your ISP sees your requests). Solution: Force all DNS traffic to your V2Ray gateway. The question isn't if you should integrate them, but how

/container config set registry-url=https://registry-1.docker.io tmpdir=usb1/pull We will use v2fly/v2fly-core (the community standard). Part 4: Method 3 – The Professional Setup:

MikroTik does not natively support the VMess or VLESS protocol. Therefore, every "V2Ray MikroTik" setup is essentially a sophisticated routing trick. The most robust, long-term solution is to use that directs specific traffic to a Linux-based V2Ray transparent proxy .

"inbounds": [ "port": 1080, "protocol": "socks", "settings": "auth": "noauth", "udp": true ], "outbounds": [ "protocol": "vmess", "settings": "vnext": [ "address": "your-server.com", "port": 443, "users": [ "id": "UUID-HERE" ] ] , "streamSettings": "network": "ws", "security": "tls" ]

"inbounds": [ "port": 12345, "protocol": "dokodemo-door", "settings": "network": "tcp,udp", "followRedirect": true , "streamSettings": "sockopt": "tproxy": "redirect" ] We create routing marks for the traffic we want to bypass censorship. For example, route all traffic to non-China IPs through the V2Ray gateway.