Vk-qf9700 Driver Windows 11 Link

If you need Gigabit speeds, replace the adapter. If you just need a temporary Ethernet connection for a legacy device, this driver fix works fine. If the above steps feel too complex or unstable, consider replacing the adapter. The VK-QF9700 is obsolete.

The is one of the most widely cloned chipset identifiers in the networking world. Found in countless inexpensive USB-to-Ethernet adapters (often branded as "RdLink," "Cable Matters," or generic "USB 2.0 to RJ45"), this chipset has been a reliable workhorse for Windows 7, 8, and 10. However, with the release of Windows 11, Microsoft introduced stricter driver signing policies and a revamped network stack. vk-qf9700 driver windows 11

Your VK-QF9700 will now behave like a native Windows 11 network adapter. Leave a comment below with your Windows 11 build number (run winver ) and the exact error code from Device Manager. Legacy hardware sometimes requires unique tweaks – but for 95% of users, the manual driver install above will solve the VK-QF9700 driver problem on Windows 11. If you need Gigabit speeds, replace the adapter

You require stable gigabit speeds, Wake-on-LAN, or absolute plug-and-play simplicity. Summary Checklist ☐ Identify your adapter’s VID/PID as 0FE6:9700 ☐ Download the 64-bit DM9601 driver (version 2.0.0.108 or newer) ☐ Install via Device Manager > Have Disk ☐ Disable IPv6 and set Speed & Duplex to 100 Mbps Full ☐ Disable USB selective suspend ☐ Reboot and test with ping 8.8.8.8 The VK-QF9700 is obsolete

You have an old adapter, need a temporary fix, or are troubleshooting a legacy device.

Struggling to get your USB 2.0 to Fast Ethernet adapter working after upgrading to Windows 11? You are not alone.

Thus, if you plug the adapter into a fresh Windows 11 machine, it will likely fail to install automatically. Short answer: No official driver from MosChip or Microsoft exists specifically for Windows 11. However, the Windows 10/8.1 driver works perfectly if installed correctly.